Product description
The pre-slab pulley for spreader bar is made of steel. This lifting accessory does not have a hook. This pulley allows to increase the lifting load.
Its sheave, reference PA6, is mounted on a spacer. The finish of the product is zinc-plated. The safety coefficient of the clevis pulley is 4 minimum.
The lifting accessory is available in several versions with a WLL ranging from 1,000 to 5,000kg and a sheave from 80*24 to 150*30 mm.
Attention, the product is delivered without cable. For more information about our lifting accessory, you can contact our customer service.
Product details
| Référence | CMU kg | Ø câble mm | Ø réas mm | Poids kg | Epaisseur (E) mm | Hauteur (H) mm | Longueur (L) mm |
| PRE 108 | 1000 | 8 – 10 | 80 x 24 | 0.68 | 44 | 140 | 90 |
| PRE 110 | 1000 | 8 – 10 | 100 x 24 | 1.1 | 45 | 176 | 110 |
| PRE 150 | 1500 | 11 – 14 | 150 x 30 | 3.6 | 55 | 267 | 160 |
| PRE 250 | 2500 | 11 – 14 | 150 x 30 | 4.1 | 55 | 267 | 160 |
| PRE 500 | 5000 | 11 – 14 | 150 x 30 | 4.5 | 65 | 267 | 160 |
The pre-slab pulley for spreader bar is made of steel. This lifting accessory does not have a hook. This pulley allows to increase the lifting load.
Its sheave, reference PA6, is mounted on a spacer. The finish of the product is zinc-plated. The safety coefficient of the clevis pulley is 4 minimum.
The lifting accessory is available in several versions with a WLL ranging from 1,000 to 5,000kg and a sheave from 80*24 to 150*30 mm.
Attention, the product is delivered without cable. For more information about our lifting accessory, you can contact our customer service.
You might also like
